OSHA 30 Hour Training

COURSE DESCRIPTION: 

This course covers thirty (30) hours of training, required by the Occupational Health and Safety Act (OSHA), necessary to obtain the 30-hour Construction Industry course completion card. The course is comprised of 25 sections, each either one or two hours in length, and covers topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help meet the Construction Industry standards established by OSHA.

Upon successful completion of the course, participants will receive an OSHA construction safety and health 30-hour course completion card from the Department of Labor.

Note: This online course has been reviewed and accepted by OSHA for online distribution in all 50 states.

LEARNING OBJECTIVES:   

• Locate OSHA Standards references applicable to specific hazardous conditions and practices (Introduction to OSHA Standards)
• Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
• Implement preventative measures for accidents in their workplace (Subpart D- Occupational health and Environmental Controls)
• Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards (Subpart E- Personal Protective Equipment)
• Understand the requirements for fire protection in the workplace (Subpart F- Fire Protection and Prevention)
• Identify types of rigging equipment used to protect employees (Subpart H- Rigging; Subpart N- Cranes and Rigging)
• Identify the critical health and safety hazards of welding and cutting in the construction industry (Subpart J- Welding and Cutting)
• Identify common electrical hazards and related OSHA standards (Subpart K- Electrical Standards)
• Understand the importance of scaffolding for workers in elevated workplaces (Subpart L- Scaffolding)
• Implement measures for protecting workers and equipment from dangerous falls (Subpart M- Fall Protection)
• Recognize the hazards associated with working in or around excavation sites (Subpart P- Excavations)
• Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q- Concrete and Masonry)
• Identify the precautions and hazards to protect workers using explosives or blasting agents (Subpart T- Demolition)
• Protect workers who perform jobs on or around stairways or ladders at worksites (Subpart X - Stairways and Ladders)
• List and describe the hazards and prevalence of confined spaces

COMPLETION:  Upon successful completion of this course, the trainee can download and print their training certificate of completion, and the official OSHA 30 hour construction training course card will be sent to you in the mail after it is processed by OSHA. An optional PDF study guide is available for purchase to print for use with the course.

TESTING:  Quizzes - All quizzes must be passed to proceed forward to the next lesson.
Final Exam - Final Exam must be passed with a 70% to pass the course. The final exam can be taken up to three times if necessary.

DISCOUNT GROUP RATES available if you want to register five (5) or more trainees. Corporate Billing Accounts also available. Contact us for special pricing and information.